Note: If you are installing this pellet stove in an area that is prone to frequent power outages, it is recommended that there be a minimum of 3' (Feet) of vertical vent pipe included in the installation to induce a natural draft in the event.
Routine cleaning note: stove will need TO BE shut OFF AND cooled enough TO handle before routine cleaning IS performed.
Dirty fuel will adversely affect the performance of the stove.
Air may also be drawn from the crawl space under the home.Web Master: There is a new digital (no dials) control panel if yours dies.When finished, slide the ash pan back into the stove and close the ash pan door and replace the ash pan trim piece.The amount of fly ash bulid-up in your stove is directly proportional to the ash content of the fuel that you are using (see pellets, page 6).Press the heat output selector switch to position.
If your stove is an insert model, refer to Appendix E for instructions on installing your shroud.
Approved pellet fuel may tend to clinker.If your serial number is below 7400, you have.Turning the control clockwise will increase the amount of fuel delivered to the burn grate.Push the rod in until the collar rests against the side of the stove.Any adjustments for combustion air should be made da vinci diamonds slot machine at the damper by varying the spacing between the side of the stove and the inside of the damper set collar.The burn grate can easily be cleaned with the grate scraper/ash pan tool, or it can be removed for cleaning.The Heat Output switch regulates the fuel feed setting and the combustion air supply simultaneously.
Combustion air and the pellet fuel feed rate will adjust automatically as the heat output selector switch is pressed.