Chip-Bewertung Sehr gut, zum Download, mSI Afterburner, mit dem "MSI Afterburner" können Sie Ihre MSI-Grafikkarte überwachen, verwalten und steuern.
Please follow the instructions provided therein Disconnect cable from the phone; Remove and insert phones battery; Press "Power on" key on the phone.
SmartMoto Mobile Service Software Unlock Manual.
Pinouts and Drivers Cable pinout for WX-series and Alcatel MTK-based models Mini USB pinout for WX-series and Alcatel MTK-based models MicroUSB pinout for Motorola and Alcatel MTK-based models Download Prolific virtual COM-port drivers Download ftdi game pet touch screen 320x240 full virtual COM-port drivers EX series unlock instruction EX112, EX115, EX122.Please, dont be worried and strictly follow the instructions of SmartMoto.Log to the tab "MTK Calculator" Choose desired model from the list Choose Provider ID from the list.Note: If this option is unchecked and imei number in the backup copy and handset is the same, backup get restored without FFS formatting.Message "Waiting" disappears, phone enters boot mode (if you don't press these 2 keys during message "Waiting" is displayed, the clip will give red E/G led and you will have to start with step 15 again).Select the appropriate model from SmartMoto list.I-Mode unlock instruction, general TestPoint connection method, general "Unlock via TestPoint" procedure.Connect data cable to the phone without battery.The cell phone is unlocked.The software should perform the following steps: SmartMoto detects S-Card; SmartMoto detects Smart-Clip; SmartMoto detects the handset and reads all phone information.SmartMoto creates a Temporary Backup File* from the handset firmware.Motofone F3 pinout Motofone F3 Unlock Clip F3 Unlock Clip is the easiest unlock solution, available on the market yet.
It is adviced to utilize an automatic driver installation software when trying to update more than one driver.
Remove S-Card dongle from USB port.
Specific procedures for each model are provided blow.E/G indicator will light green and go off, the phone will switch off (some models will automatically turn on then).Should be used if a handset can not be flashed with "Smart Restore" Smart restore Flashing via a special algorithm that provides faster flashing progress.If the handset was connected to SmartMoto, in boot mode the temporary backup file will not be created.Press "Read codes" button.The phone powers on and is ready to be unlocked by Smart-Clip using simple "press one button" method (Standard unlock procedure for P2K models).Data that differs from the handset's firmware vista autocad 2007 keygen get flashed, only.M1000 variants with higher boot versions will require TestPoint procedure to be unlocked.M1000 (boot version ) needs to be unlocked via Remove RSA option Connect handset to PC via Smart-Clip (phone USB cable Smart-Clip LPT cable PC).Log to the tab "MTK models" Connect * powered OFF phone.Enter the code that was read by SmartMoto with the status "Activated".
The phone enters boot mode (if you don't press these two keys during "Waiting for PST" message, the Clip will give red E/G led and you will have to start with step 1 again).
Phone's LCD remains blank; Press OK in SmartMoto.