Wizard Detected PPPoA Login Account Setup: Enter your login user name and crimson universal tv remote control manual password.
Please follow the steps under the connection type detected by your router: Note: If the Setup Wizard finds no connection, please check the physical connection of your devices, and make sure that your ISP has already activated your DSL account.
Connect the netgear DSL modem router to its power supply unit (PSU) (Not shown in the diagram) and wait about a minute for it to boot.The Setup Wizard detects the type of internet connection.The information in this article applies if you configuring a DSL Internet connection with a netgear router that uses the Smart Wizard user interface.Enter the IP address of your ISP's Primary DNS Server.Yes for the Setup Wizard to detect the type of Internet connection and click.This article will help you configure your netgear DSL modem router using Smart Wizard.This information should have been provided to you by your ISP.Click, setup Wizard on the top left corner, Select.The default username is admin and the default password is password.
Wizard Detected Fixed IP (Static) Account Setup:.
Wizard Detected Dynamic IP Account Setup: Click Apply to set Dynamic IP as the connection method.Open a web browser and type the router's IP address which would be either http or http in the address bar and press Enter.If the default username and password is not working, you might have changed the password.This article will help you configure your netgear router for cable/broadband internet connection.Look at the IP Address field to see if you have a valid IP address (that is, not blank or filled with zeroes, such as ).If you have a router with a netgear genie user interface, see, how to configure your netgear router for cable internet connection with netgear genie.The information in this article applies if you configuring a cable internet connection with a netgear router that uses the Smart Wizard user interface.The Setup Wizard will report which connection type it has discovered, and then display the appropriate configuration page.Enter your assigned IP Address, Subnet Mask, and the IP Address of your ISP's gateway router.
If a Secondary DNS Server address is available, enter it also.