Page 17, note: Globe style and number of lights may vary.
We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.
Turn the housing counterclockwise until the machine assembly screws panini grill instruction manual are firmly situated in the narrow end of the keyhole slots.
Page 10 12-volt battery into position of the jumpers in the not empires 3 full version function.Canopy Trim Ring Canopy 6-5.Today we bring you hunter ceiling fan installation manual that provides along 20 pictures furthermore Hunter Ceiling Fan Mounting also with Hunter Ceiling Fan Remote Manual also with Hunter Ceiling Fans Installation Manual Model including Ceiling Installation Guide as well as Hunter Ceiling Fan Wiring.Slide the clamp open.Insert the end of the braided cable through the ceiling plate and one of the holes in the outlet box into the ceiling.Page 2 - To reduce the risk of fire, electrical shock, or motor damage, building structure or use only Hunter Solid State Speed Controls.Hanger Note: Your fan comes with four pre-installed neoprene noise Bracket isolators.Different code, so that the operation the transmitter.Outlet Box Mounting Style Considering Optional.They will be needed for blade iron installation.Install third fourth canopy screw in round hole on canopy.2 the outlet box and the ungrounded wires on the other side of the outlet box.Page 8 4-5 full turns) until it stops.Wire Clamp Step 4-2 4-4.
Page 12, lift the canopy into place so that Insert the two canopy screws lifted into place, the canopy fits into the screw holes are aligned.
Floor The fan blades are at least 7 feet above the floor and the ceiling is at least.
The remote control can be a hand held unit or a switch.Date Purchased where Purchased, form# Hunter Fan.To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist clockwise.Wall switches are not included.Page 4, you need both You need only a Longer a Longer Downrod Downrod an Angled Mounting Kit *most common M /30/12 Hunter Fan Company M /30/12 Hunter Fan Company.Remove the shipping bumpers.Thread the end of the cable up through the wire clamp.Pull the knob off of the speed Steps control unit and remove your existing Black switch from the switch box.Reinstall the globe assembly.Maybe this keywords is what u looking.